Magigoo Pro Flex (50ml) – Adhesion for flexible filaments

Magigoo Pro Flex is designed for flexible materials—especially thermoplastic elastomer copolymers (TPE/TPC)—where adhesion and clean removal can be tricky. It provides a strong base during printing while helping make removals manageable (often with water-assisted release).

Key benefits

• Purpose‑built for flexible plastics, especially TPE/TPC type filaments.
• Strong adhesion platform during printing while supporting easier removal.
• Designed to be used like other Magigoo pen adhesives with thin, even coats.

How to use

1. Apply on a clean build surface (ideally on a cool bed).
2. Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
3. Spread an even, thin coat over the active print area—make sure no spots are missed.
4. Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.

Print tips

• Follow your filament maker’s bed/nozzle temperatures; raising first-layer temps by ~5–10°C can aid adhesion.
• Some prints benefit from a 10–20mm brim for best first-layer security.
• For stubborn flexible prints, water around the part can help release.

Cleanup

Use water and a cloth. For flexible materials, water can also assist with part release.

Safety & handling

• Apply on a cool bed and avoid applying when the bed is already hot.
• Do not squeeze aggressively—flow is controlled by the applicator valve.

What’s included

• 1 × Magigoo Pro Flex pen bottle