Free Whitepaper: The Comprehensive Guide to Comparing 3D Filament

download Now
Aluminum Filled - 1.75mm PLA Filament - 1 kg

Aluminum Filled - 1.75mm PLA Filament - 1 kg

$38.95 CAD was

This type of filament has metal powder combined with the PLA filament. Due to the metal content, the printed objects are heavier and have a more authentic feel as if they were made of metal. These prints can be further enhanced by sanding or polishing, thus creating beautiful and unique pieces.

Because they have a higher density than standard PLA filaments, the objects feel less like plastic and more like metal. They are highly durable.

If you require a dull, matte finish then simply don’t polish the prints which look like cast metal fresh from the mold. 3d printing in this type of filament has many uses such as in jewelry making, props, costumes, figurines, and robots.

Serious designers, as well as hobbyists, will enjoy printing with these filaments.

Technical Data

General
Features Renewable Resource Content
Physical Nominal Value Unit Test Method
Density 1.20 to 1.30 g/cm³ Internal Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) 2.0 to 10 g/10 min Internal Method
Mechanical Nominal Value Unit Test Method
Tensile Stress (Yield) > 50.0 MPa Internal Method
Tensile Strain (Break) > 3.0 % Internal Method
Impact Nominal Value Unit Test Method
Notched Izod Impact Strength 3.0 to 5.0 kJ/m² Internal Method
Thermal Nominal Value Unit Test Method
Glass Transition Temperature 60.0 to 63.0 °C Internal Method
Melting Temperature 170 to 180 °C Internal Method
In stock

Aluminum Filled - 1.75mm PLA Filament - 1 kg is currently unavailable and will be restocked soon!

Leave your email address if you would like to be notified when it becomes available.


Free Shipping On All Orders >$120 and $10 Flat-rate Shipping On Orders >$20