Free Whitepaper: Download our Free Whitepaper: The Comprehensive Guide to Comparing 3D Filament
Black - 2.85mm Taulman Bridge Nylon Filament - 1 lb
Bridge was given this name because it combined(bridged) the strength of nylon filament with the price of PLA and ABS filaments. It used for manufacturing of any parts or designs which require the strength of nylon, yet are prone to pulling away from the print bed at sharp transitions. Bridge carries the same flexibility as 645 and a slippery surface texture on all perimeters.
It has some amazing features which make it one of the most popular 3D printing materials on our website. It is lower in price than other nylons but has the same slippery texture which made adhering to the printing platform difficult. We recommend using our extremely low cost “Elmer’s Glue-All” to resolve this issue.
Bridge is a high-quality run polymer which has reduced water uptake and shrinkage. It needs little to no drying in the winters and only needs to be warmed in the summer months.
|Manufacture Part ID||bdg1/bdg3|
|Tg Glass transition||52C|
|Pyrolysis - Thermal degradation||360C|
|Ambient Temp (Enclosure)||30- 100C|
|Nominal Diameter (3mm Maximum Dia)||1.75mm/2.85mm|
|Weight /spool||1 lb|
|Nominal Length/spool (In Feet)||490/180|
|Shrinkage - in/in||0.0061|
|Tensile Stress "PSI" when 3D Printed||4.800|
|Ultimate Elongation when 3D Printed||248.20%|
|Modulus "PSI" when 3D Printed||26.544|
|FDA - Direct Food Contact||None|
|FDA Direct Drink Contact||None|
|UL 94 HB||Yes|
|UL 94 V2 at 1.5 mm thickness||Yes|
|Surface texture||Very good|
|Living Hinge||Very good|
|Use of Taps for threads||Excellent|
|CNC finish tooling||Any|
|CNC Coolant||Forced Air Only|
|Use in 3D Forging||Excellent|
|Dye type||Acid Based|
|Dye Uptake (Saturation)||Very good|
|Specifications are subject to change|
Free Canada-wide Shipping On Orders Over $120!
$10 Flat-rate Canada-wide Shipping On Orders >$20