Copper Filled - 2.85mm PLA Filament - 1 kg
This type of filament has metal powder combined with the PLA filament. Due to the metal content, the printed objects are heavier and have a more authentic feel as if they were made of metal. These prints can be further enhanced by sanding or polishing, thus creating beautiful and unique pieces.
Because they have a higher density than standard PLA filaments, the objects feel less like plastic and more like metal. They are highly durable.
If you require a dull, matte finish then simply don’t polish the prints which look like cast metal fresh from the mold. 3d printing in this type of filament has many uses such as in jewelry making, props, costumes, figurines, and robots.
Serious designers, as well as hobbyists, will enjoy printing with these filaments.
|Features||Renewable Resource Content|
|Physical||Nominal Value Unit||Test Method|
|Density||1.20 to 1.30 g/cm³||Internal Method|
|Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)||2.0 to 10 g/10 min||Internal Method|
|Mechanical||Nominal Value Unit||Test Method|
|Tensile Stress (Yield)||> 50.0 MPa||Internal Method|
|Tensile Strain (Break)||> 3.0 %||Internal Method|
|Impact||Nominal Value Unit||Test Method|
|Notched Izod Impact Strength||3.0 to 5.0 kJ/m²||Internal Method|
|Thermal||Nominal Value Unit||Test Method|
|Glass Transition Temperature||60.0 to 63.0 °C||Internal Method|
|Melting Temperature||170 to 180 °C||Internal Method|
Free Canada-wide Shipping On Orders Over $115!
$10 Flat-rate Shipping to the USA On Orders Over $200!