{"product_id":"prusa-core-one-gen-2-indx-assembled","title":"Prusa CORE One+ (Gen 2) INDX Assembled Canadian Certified Edition","description":"\u003ch1\u003ePrusa CORE One+ (Gen 2) INDX 4-Tool \u0026amp; 8-Tool 3D Printer\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003ePrusa CORE One+ (Gen 2) INDX\u003c\/strong\u003e is an enclosed CoreXY 3D printer with a dedicated toolchanger system for fast, low-waste multi-material and multi-colour 3D printing. Available with \u003cstrong\u003e4 or 8 tools\u003c\/strong\u003e, the INDX system gives each material its own nozzle, eliminating the need to repeatedly purge the active nozzle when changing materials.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e248 × 205 × 270 mm build volume\u003c\/strong\u003e, a chamber temperature of up to \u003cstrong\u003e55°C\u003c\/strong\u003e, a heated bed up to \u003cstrong\u003e120°C\u003c\/strong\u003e, and a maximum nozzle temperature of \u003cstrong\u003e300°C\u003c\/strong\u003e, the CORE One+ INDX is built for both everyday 3D printing and demanding engineering applications.\u003c\/p\u003e\n\u003cp\u003eThe assembled version arrives factory-built and tested, and 3D Printing Canada prepares each imported unit for the Canadian market.\u003c\/p\u003e\n\u003ch2\u003ePrusa INDX Toolchanger: 4 or 8 Dedicated Tools\u003c\/h2\u003e\n\u003cp\u003eThe INDX toolchanger uses separate passive tools with dedicated nozzles rather than forcing every material through one shared nozzle.\u003c\/p\u003e\n\u003cp\u003eThis makes material changes fast and dramatically reduces the waste normally associated with multi-material printing. Prusa specifies approximately \u003cstrong\u003e12 seconds per colour change\u003c\/strong\u003e with around \u003cstrong\u003e0.013 g of waste per change\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eChoose the configuration that fits your workflow:\u003c\/p\u003e\n\u003ch3\u003e4-Tool INDX\u003c\/h3\u003e\n\u003cp\u003eThe 4-tool configuration provides four dedicated nozzles for multi-material or multi-colour printing. It is a practical choice for users who typically work with up to four materials or colours at once, including combinations such as a model material plus dedicated support material.\u003c\/p\u003e\n\u003cp\u003eThe assembled 4-tool version is pre-equipped for expansion to \u003cstrong\u003e8 tools\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e8-Tool INDX\u003c\/h3\u003e\n\u003cp\u003eThe 8-tool configuration provides the full capacity of the INDX system, allowing up to eight materials, colours or nozzle configurations to remain loaded and ready to use.\u003c\/p\u003e\n\u003cp\u003eThis is ideal for complex multi-material parts, multi-colour models, soluble or dedicated support materials, and workflows where changing filament spools manually would slow production.\u003c\/p\u003e\n\u003ch2\u003eLess Waste Without a Purge Tower\u003c\/h2\u003e\n\u003cp\u003eTraditional single-nozzle multi-material printers must flush one material from the nozzle before another material can be printed. Depending on the model, this can create substantial amounts of purge material and often requires a purge or wipe tower.\u003c\/p\u003e\n\u003cp\u003eINDX uses a different approach. Each tool has its own nozzle, so the printer can switch between tools without flushing the previous material through the active nozzle.\u003c\/p\u003e\n\u003cp\u003eBenefits include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately \u003cstrong\u003e12-second material changes\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately \u003cstrong\u003e0.013 g of waste per colour change\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDedicated nozzle for each loaded tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo conventional purge tower required for material changes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReduced material waste\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReduced risk of colour and material cross-contamination\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUp to \u003cstrong\u003e8 materials or colours\u003c\/strong\u003e loaded and ready to print\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe dedicated-tool design also makes it practical to combine materials with different properties, such as rigid and flexible filaments or model and support materials.\u003c\/p\u003e\n\u003ch2\u003eEnclosed CoreXY 3D Printer for Engineering Materials\u003c\/h2\u003e\n\u003cp\u003eThe CORE One+ (Gen 2) provides a fully enclosed \u003cstrong\u003e248 × 205 × 270 mm\u003c\/strong\u003e build volume. Its controlled chamber environment helps reduce warping and improve print consistency when working with materials that benefit from elevated ambient temperatures.\u003c\/p\u003e\n\u003cp\u003eThe chamber can reach \u003cstrong\u003e55°C\u003c\/strong\u003e, while the heated print bed reaches up to \u003cstrong\u003e120°C\u003c\/strong\u003e and the nozzle reaches up to \u003cstrong\u003e300°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe CORE One+ INDX is designed for materials including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePLA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePETG\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eASA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eABS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePolycarbonate (PC)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNylon \/ Polyamide (PA)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTPU\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePVA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBVOH\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOther compatible non-abrasive materials within the printer's temperature and material requirements\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor lower-temperature materials such as PLA, smart ventilation helps manage the enclosed chamber and reduce heat-related issues.\u003c\/p\u003e\n\u003ch2\u003eMulti-Material Printing for Functional Parts\u003c\/h2\u003e\n\u003cp\u003eINDX is more than a multi-colour system. Dedicated tools make it possible to use different materials for different functions within the same print.\u003c\/p\u003e\n\u003cp\u003eExamples include:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRigid + flexible parts:\u003c\/strong\u003e Print a rigid structural component with TPU seals, grips, hinges or other flexible features.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel + support materials:\u003c\/strong\u003e Keep dedicated support material loaded for complex geometries and easier support removal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineering materials:\u003c\/strong\u003e Combine materials such as PC, ASA, Nylon and other compatible filaments for functional prototypes and technical parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti-colour models:\u003c\/strong\u003e Keep multiple colours loaded at once without repeatedly unloading and loading filament.\u003c\/p\u003e\n\u003ch2\u003eCoreXY Performance in a Compact Enclosure\u003c\/h2\u003e\n\u003cp\u003eThe CORE One+ uses a CoreXY motion system designed for fast, precise movement while keeping the moving mass low. The fully enclosed design provides a stable printing environment without requiring the footprint of a large industrial 3D printer.\u003c\/p\u003e\n\u003cp\u003eWith automatic first-layer calibration using a load cell, a 3.5-inch touchscreen and support for multiple nozzle sizes, the CORE One+ INDX is designed to provide a straightforward workflow while retaining the flexibility expected from a professional Prusa 3D printer.\u003c\/p\u003e\n\u003ch2\u003ePrusaSlicer, EasyPrint and Offline Printing\u003c\/h2\u003e\n\u003cp\u003eThe CORE One+ INDX works with \u003cstrong\u003ePrusaSlicer\u003c\/strong\u003e, Prusa's full-featured slicing software for Windows, macOS and Linux.\u003c\/p\u003e\n\u003cp\u003eFor a simpler workflow, \u003cstrong\u003eEasyPrint\u003c\/strong\u003e provides browser-based model preparation. The printer also supports Prusa Connect and the Prusa app for connected workflows.\u003c\/p\u003e\n\u003cp\u003eThere is \u003cstrong\u003eno subscription required to keep printing\u003c\/strong\u003e, and Prusa provides software and firmware updates without recurring software fees.\u003c\/p\u003e\n\u003cp\u003eThe printer can also operate without a permanent Internet connection, making it suitable for private, workshop, educational and other environments where continuous cloud connectivity is not desirable.\u003c\/p\u003e\n\u003ch2\u003eFactory-Assembled and Prepared for the Canadian Market\u003c\/h2\u003e\n\u003cp\u003eThis listing is for the \u003cstrong\u003eassembled Prusa CORE One+ (Gen 2) with INDX\u003c\/strong\u003e. The printer is factory-assembled and tested before shipment from Prusa.\u003c\/p\u003e\n\u003cp\u003eAs a Canadian reseller, \u003cstrong\u003e3D Printing Canada imports these machines from the Czech Republic and prepares them for the Canadian market\u003c\/strong\u003e. Each unit goes through our Canadian compliance and preparation process before being made available to customers.\u003c\/p\u003e\n\u003cp\u003eYou also have access to local Canadian product and technical support from the 3D Printing Canada team.\u003c\/p\u003e\n\u003ch2\u003e4-Tool or 8-Tool: Which Should You Choose?\u003c\/h2\u003e\n\u003cp\u003eChoose the \u003cstrong\u003e4-Tool INDX\u003c\/strong\u003e if you normally work with up to four materials or colours and want the flexibility to expand later.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003e8-Tool INDX\u003c\/strong\u003e if you regularly use several materials, colours or support materials and want the maximum number of tools available without changing loaded materials between prints.\u003c\/p\u003e\n\u003cp\u003eBoth configurations use the same CORE One+ (Gen 2) platform, enclosure, build volume, chamber heating and INDX technology. The primary difference is the number of tools supplied with the printer.\u003c\/p\u003e\n\u003ch3\u003eWhy Buy the CORE One+ INDX from 3D Printing Canada?\u003c\/h3\u003e\n\u003cp\u003eYou're not just buying a printer shipped from Europe.\u003c\/p\u003e\n\u003cp\u003e3D Printing Canada provides \u003cstrong\u003eCanadian-based sales and technical support\u003c\/strong\u003e, handles the Canadian import and preparation process, and makes the CORE One+ INDX available with local support and service.\u003c\/p\u003e\n\u003cp\u003eFor Canadian businesses, schools, engineering teams, workshops and serious makers, that means you have a Canadian point of contact for the printer after the sale — not just a box and a manufacturer website.\u003c\/p\u003e","brand":"Prusa","offers":[{"title":"4 Toolheads","offer_id":45757800775749,"sku":null,"price":3159.0,"currency_code":"CAD","in_stock":true},{"title":"8 Toolheads","offer_id":45757800808517,"sku":null,"price":3499.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2719\/6506\/files\/4b48dc0f-e54b-4634-8f54-a9fa8d616b12_1789500871465.jpg?v=1789500873","url":"https:\/\/3dprintingcanada.com\/products\/prusa-core-one-gen-2-indx-assembled","provider":"3D Printing Canada","version":"1.0","type":"link"}