Free Whitepaper: Download our Free Whitepaper: The Comprehensive Guide to Comparing 3D Filament
All Metal V6 Hotend With Wires, Fan Duct And Cooling Fan 12V, Assembled B (Bowden Type)
In stockClick here to read our Price Match Policy.
V6 Hotend With Wires, Fan Duct And Cooling Fan, Assembled B (Bowden Type, with All Metal Heatbreak)
Similar to the well known V6, this hotend is prebuilt, ready to be used. This hot end contains a PTFE liner in the cold zone but does not extend past the heat break into the heater cartridge, therefore the heat break and melt zone are still full metal.
This version also includes the Bowden tube coupler at the top of the cold zone. When installing on your printer, the PTFE tube should be inserted fully into the hot end, until it touches the heat break (about an 45mm). Maximum printing temperature should be around 280C although higher temperatures can be used for short periods of time.
All components are 12v. Polarity for the heater cartridge and thermistor do not matter, you may connect them in any sequence.
Compatible with 3rd party V6 nozzles, heater blocks and accessories.