{"product_id":"z-polymers-tullomer-high-strength-filament-1-75mm-5-metres","title":"Z-Polymers Tullomer High-Strength Filament - 1.75mm (5 Metres, Cut-to-Order)","description":"\u003cp\u003e\u003cstrong\u003eSold in 5 metre lengths, cut to order.\u003c\/strong\u003e Each unit is 5 m of filament (approx. 16.75 g). Order more than one and we cut your total length as one continuous piece. Your filament is cut from a master spool, weighed, coiled and sealed in a clean bag. Tullomer is supplied coiled, not on a spool.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003cth\u003eTotal length\u003c\/th\u003e\n\u003cth\u003eApprox. weight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003ctd\u003e16.8 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e10 m\u003c\/td\u003e\n\u003ctd\u003e33.5 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003ctd\u003e50.3 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e20 m\u003c\/td\u003e\n\u003ctd\u003e67.0 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e25 m\u003c\/td\u003e\n\u003ctd\u003e83.8 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e1 m of Tullomer weighs approximately 3.35 g.\u003c\/p\u003e\n\n\u003ch2\u003eLightweight, rigid and ready to use straight off the printer\u003c\/h2\u003e\n\u003cp\u003eTullomer from Z-Polymers is a fully crystalline, highly rigid 3D printing filament that outperforms most engineering polymers without post-processing. It pairs over 200 MPa tensile strength with a low density of 1.4 g\/cm³, making it suited to lightweight, load-bearing structural parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey numbers.\u003c\/strong\u003e Printed Tullomer test specimens reached 250 MPa tensile strength, 25 GPa tensile modulus, 225 MPa flexural strength and 20 GPa flexural modulus (minimum measured values; specimens printed with 100% aligned infill, so real-world parts may differ). Tullomer melts at 280°C, has no glass transition, and stays stable from subzero temperatures to 180°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for harsh environments.\u003c\/strong\u003e Tullomer is self-extinguishing (UL94 V-0 expected) with minimal outgassing. It resists acids, alkalis, solvents, fuels, oils and UV exposure, forms a strong oxygen and moisture barrier, and offers low creep, abrasion resistance and minimal thermal expansion. A low dielectric constant gives it RF transparency, alongside strong thermal and electrical insulation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo post-processing.\u003c\/strong\u003e Tullomer parts need no annealing. It runs on industrial high-temperature printers and on consumer printers that reach a 300°C nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti-material reinforcement.\u003c\/strong\u003e On dual-nozzle or tool-changer printers, Tullomer can be printed selectively inside a part made from another material, turning a desktop printer into a composite-part system. Z-Polymers' Z-CAD software places that reinforcement automatically: import a part, choose your reinforcement path, and export a print-ready 3MF. Try it free at \u003ca href=\"https:\/\/z-cad.com\" target=\"_blank\" rel=\"noopener\"\u003ez-cad.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRaw material and filament are made in the USA.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Low density (1.4 g\/cm³) for load-bearing parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh strength and rigidity:\u003c\/strong\u003e Over 200 MPa tensile strength; fully crystalline.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal stability:\u003c\/strong\u003e Stable from subzero temperatures up to 180°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-extinguishing:\u003c\/strong\u003e Non-flammable, UL94 V-0 expected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensional stability:\u003c\/strong\u003e Minimal thermal expansion, low creep and abrasion resistance for precise parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical and UV resistance:\u003c\/strong\u003e Excellent against acids, alkalis, solvents, fuels and oils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen and moisture barrier:\u003c\/strong\u003e Strong barrier properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical performance:\u003c\/strong\u003e High dielectric strength, low dielectric constant and RF transparency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutgassing:\u003c\/strong\u003e Minimal outgassing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo post-processing:\u003c\/strong\u003e Parts are ready without annealing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSustainable:\u003c\/strong\u003e PFAS-free and 100% recyclable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProperties \u0026amp; Applications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eTullomer performance\u003c\/th\u003e\n\u003cth\u003eExample applications\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical strength\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;200 MPa tensile, highly rigid, low density\u003c\/td\u003e\n\u003ctd\u003eLightweight, load-bearing structural components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemical and UV resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent against acids, alkalis, solvents, fuels, oils\u003c\/td\u003e\n\u003ctd\u003eChemical processing and outdoor parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame resistance\u003c\/td\u003e\n\u003ctd\u003eSelf-extinguishing, UL94 V-0 expected\u003c\/td\u003e\n\u003ctd\u003eSafety-critical and railway applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature resistance\u003c\/td\u003e\n\u003ctd\u003eStable from subzero to 180°C\u003c\/td\u003e\n\u003ctd\u003eUnder-the-hood automotive parts, high-temperature environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermal expansion\u003c\/td\u003e\n\u003ctd\u003eMinimal\u003c\/td\u003e\n\u003ctd\u003eAerospace and precision components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical insulation\u003c\/td\u003e\n\u003ctd\u003eDielectric constant 3, loss tangent 0.002\u003c\/td\u003e\n\u003ctd\u003eElectronics and electrical housings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOxygen and moisture barrier\u003c\/td\u003e\n\u003ctd\u003eStrong\u003c\/td\u003e\n\u003ctd\u003eSeals, packaging and protective coatings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRF transparency\u003c\/td\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003ctd\u003eAntenna components and sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutgassing\u003c\/td\u003e\n\u003ctd\u003eMinimal\u003c\/td\u003e\n\u003ctd\u003eSafety-critical applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSustainability\u003c\/td\u003e\n\u003ctd\u003ePFAS-free, 100% recyclable\u003c\/td\u003e\n\u003ctd\u003eSustainable product design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eBefore You Buy\u003c\/h2\u003e\n\u003cp\u003eTullomer prints most geometries on high-temperature printers and many geometries on lower-cost consumer printers. Strength and layer adhesion depend on your machine, and some setting adjustments may be needed for your specific part. Recommended print profiles are a starting point and do not guarantee results. Application engineering support for a specific part is not included with material purchases. Tullomer is not compatible with an AMS; run it from an open-air spool holder. No drying is needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinter Requirements \u0026amp; Print Settings\u003c\/h2\u003e\n\u003cp\u003eTullomer needs a nozzle that reaches at least 300°C, a heated bed of at least 110°C, and an enclosure. A high-temperature printer gives the best results; many consumer printers that meet these minimums print small to medium parts well.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eReinforcement only\u003c\/th\u003e\n\u003cth\u003eIdeal: consumer printers\u003c\/th\u003e\n\u003cth\u003eIdeal: high-temp printers\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle (°C)\u003c\/td\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e325–350\u003c\/td\u003e\n\u003ctd\u003e350+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed (°C)\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003ctd\u003e120+\u003c\/td\u003e\n\u003ctd\u003e180–200+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChamber (°C)\u003c\/td\u003e\n\u003ctd\u003e45–50\u003c\/td\u003e\n\u003ctd\u003e65+\u003c\/td\u003e\n\u003ctd\u003e120+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInfill speed (mm\/s)\u003c\/td\u003e\n\u003ctd\u003e100–150\u003c\/td\u003e\n\u003ctd\u003e100–200\u003c\/td\u003e\n\u003ctd\u003e100–200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner wall speed (mm\/s)\u003c\/td\u003e\n\u003ctd\u003e50–100\u003c\/td\u003e\n\u003ctd\u003e50–100\u003c\/td\u003e\n\u003ctd\u003e75–100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter wall speed (mm\/s)\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e25–50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart cooling fan\u003c\/td\u003e\n\u003ctd\u003eOff\u003c\/td\u003e\n\u003ctd\u003eOff\u003c\/td\u003e\n\u003ctd\u003eOff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eBed and adhesion:\u003c\/strong\u003e textured or smooth plates both work; a thick steel plate helps but is optional. An adhesive is required for Tullomer - Z-Polymers recommends Magigoo PC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStrength vs. layer bonding:\u003c\/strong\u003e Tullomer is strongest in X and Y. Faster speeds and thin layers increase XY strength. Like most FFF materials it is weaker in Z; for better layer bonding, raise nozzle and chamber temperatures, widen line widths, or print slower and with thicker layers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarping:\u003c\/strong\u003e keep the part hot throughout the print, and use layers thicker than 0.1 mm on warp-prone geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: DO NOT USE AN AMS.\u003c\/strong\u003e Tullomer is not compatible with an AMS (automatic material system), and forcing it through one may damage the material and your equipment. Standard operation is an open-air external spool holder. Tullomer does not absorb moisture and does not need to be dried.\u003c\/p\u003e\n\n\u003ch2\u003eDownloads \u0026amp; Support\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2719\/6506\/files\/Tullomer-Cut-to-Order-Quick-Start-Insert.pdf?v=1793374355\" target=\"_blank\" rel=\"noopener\"\u003eTullomer Cut-to-Order Quick Start Guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/z-cad.com\/docs\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet, design \u0026amp; printing guidance, slicer profiles and self-help articles (z-cad.com\/docs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/z-cad.com\/docs\/slicer-setup-and-printing\" target=\"_blank\" rel=\"noopener\"\u003eSlicer setup \u0026amp; printing profiles\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFilament Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Off-white \/ natural translucent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.4 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear weight:\u003c\/strong\u003e approx. 3.35 g per metre (approx. 16.75 g per 5 m unit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMelting point:\u003c\/strong\u003e 280°C (DSC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e F100120 (cut from 1 kg master spool)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of manufacture:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Z-Polymers","offers":[{"title":"Default Title","offer_id":46205303554117,"sku":"ZP-TULLOMER-5M","price":29.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2719\/6506\/files\/Tullomer-Cut-to-Order-Coiled-Filament-Bag.png?v=1793374413","url":"https:\/\/3dprintingcanada.com\/products\/z-polymers-tullomer-high-strength-filament-1-75mm-5-metres","provider":"3D Printing Canada","version":"1.0","type":"link"}