This kit is great and has excellent instructions. However make sure that your machine can actually use it. The new Ender 5 Plus version has a press gear with no flat on the extruder stepper which makes this drop in kit incompatible without modifying/potentially damaging the stock stepper or purchasing a new stepper that works with the kit.

Good price and install was a breeze. Worked perfectly on the first print. Glad to have a local store to shop at!

Easy to install, great product!

Easy to install and is performing much better than the original hot end on my CR10S Pro V2! Took maybe 10 minutes to get it all hooked up and printing.

I installed the all metal hot end on my CR10S Pro and I am now easily able to find and fit different nozzle sizes due to the normal threading (i.e. same as, for example, stock Ender 3 nozzles). It has been performing perfectly. Awesome service from 3D Canada as a sidenote.

Just perfect fit !

I really like this hotend. Easy to install. Works as advertised. I plan on cooking a lot of plastic with it.

Install was very easy, and the kit is premium quality!

I purchased a Creality CR10S-Pro with no prior 3D printing experience. After tightening the setscrews for the carriage drive and reducing the head speeds (especially for non-printing head translations) I now get very accurate and reliable printing in draft mode. I also replaced the stock platform upper aluminum plate with a tempered glass plate which was sanded rough (120 grit to 400 grit) and use gluestick as the release agent. By re-heating the print surface prior to part removal, the parts release without much effort. Another technique I use is to manually pre-level the horizontal print bar and then activate the stepper drive to hold position by doing a manual vertical position adjust, manually level the platform with the feeler gauge, and then adjust the Z level during the first layer to ensure that the plastic is forced into the gluestick layer to deliver good adhesion. The Neat Premium PLA works very well and delivers mechanically strong parts for electric motors and propellers with a print temperature of 209C and an initial platform temperature of 60C. Due to the softening of the PLA at operating temperatures above 80C, I am now modifying the printer with an all-metal hot end and an enclosure to print Nylon and perhaps ABS.