Magigoo Pro PA (50ml) – Nylon (polyamide) bed adhesion

Magigoo Pro PA is engineered for nylon (polyamide) filaments that tend to warp and can be difficult to keep bonded to a build plate. It provides a strong adhesion platform to improve first‑layer reliability and print success with PA materials.

Key benefits

• Designed specifically for nylon (PA) filaments to help reduce warping.
• Improves first‑layer reliability for functional parts and engineering prints.
• Water‑based cleaning; wipe with water after use.

How to use

1. Apply on a clean build surface (ideally on a cool bed).
2. Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
3. Spread an even, thin coat over the active print area—make sure no spots are missed.
4. Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.

Print tips

• Nylon is hygroscopic—dry filament and print in controlled conditions for best results.
• For larger prints, a second application over a dried first layer can improve adhesion.

Cleanup

Wipe the cooled bed with a damp cloth using just water.

Safety & handling

• Apply on a cool, cleaned bed; do not apply when the bed is already hot.

What’s included

• 1 × Magigoo Pro PA pen bottle

Technical specifications

What printers are saying