Higher Flow. Revo™ High Flow increases your setup's volumetric flow rate, enabling you to print faster!
Push your printer’s print speed capabilities to the limit with our Revo™ High Flow Fully Loaded HotSide Kit. Our Revo™ High Flow Nozzles enable you to boost your flow rates by approximately 70%, all while maintaining the same form factor as our standard Revo™ nozzles. This is thanks to E3D’s unique internal nozzle geometry, which increases the surface area and consequently improves thermal transfer. Choose this kit and print fast and big in no time. Pairs perfectly with the E3D Revo™ Six 24V Coldside.
WHAT’S INCLUDED?:
- 1 x 0.6mm High Flow Revo™ Brass Nozzle
- 1 x 0.8mm High Flow Revo™ Brass Nozzle
- 1 x 1.0mm High Flow Revo™ Brass Nozzle
- 1 x 1.2mm High Flow Revo™ Brass Nozzle
- 1 x 60W HeaterCore
How does this work? Unlike our previous High Flow Hotends (Volcano and SuperVolcano), Revo High Flow maintains the exact same form factor as standard Revo HotEnds; this means there is no need to adjust your pre-existing mount and fan duct setups! Revo High Flow uses a unique custom internal geometry to increase the surface area for improved thermal transfer to the filament.
Why a 60W HeaterCore? Whilst not required in most cases, the 60W core adds extra power for printing high flow at higher temperatures for example with materials such as Polycarbonate. For those users printing with PLA and PETG the 40W HeaterCore will be more than sufficient, but if you’re seeking the maximum flow performance then we recommend pairing your nozzles with a 60W HeaterCore.
More nozzle sizes. Revo High Flow unlocks higher flow for existing 0.4mm, 0.60mm, and 0.80mm nozzle sizes and adds 1.00mm, 1.20mm, and 1.40mm nozzle sizes to your arsenal.
Including the standard Revo nozzle range, which is interchangeable, this allows for a wide range of printing applications with 0.15mm nozzles all the way up to 1.40mm!
Rapid identification. Identify nozzle sizes at a glance, thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has 'HF' and its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn!
Lets talk numbers. Empirically providing useful volumetric flow rate figures is a challenging task. To make our figures as close to real use cases as possible, we have stuck to a semi-standardised testing procedure. For full details on our Volumetric flow rate findings, please refer to our documentation
Summary:
It is important to note that when we subject other high-flow hotends on the market to the same testing procedure, the maximum flow rate claims fall short when appropriate print temperature, track widths and layer heights are used.
Similarly, we have benchmarked standard filaments that are not necessarily designed to be used in high-flow situations. If you use HTPLA, PLA³ filament or other specifically high-flow designed materials, the maximum volumetric flow rate you can achieve with Revo High flow is seriously impressive!