Creality's Famed "Yellow Flat Springs" D8*L25

Creality pressure-control heatbed springs are a great way to get more positive 'staying power' for your bed knobs. If you find yourself making re-adjustments on the stock Ender-3 or CR10/CR10S bed, these springs will help by exerting more pressure on the wheel, preventing it from turning.

3004040007

3004040007=4* 4004010196

Remi P.

They are more strong than the originals. I'm clumsy and it's harder to me to move the ajustement knob with those ones

Bob Z.

Springs are much easier to get level bed and settings are retained or need very minor tweaks

Joseph K.

Bed levelling is much easier now with the new springs. The Creality‘s springs were nasty. Now I have better levelling springs that work great

Michel F.

These are perfects

Dennis W.

They work great. Much more stiff than the factory springs. Flat tops are smoother adjusting and they hold level very well.

Glenn K.

Made levelling of my printer bed so much easier.

Dan N.

The springs took quite a bit of play out of the bed really stabized the surface would recommend them as an easy upgrade

Kelly E.

So much better than the original springs! Easy peasy bed level!

jim f.

Works great.

Dana S.

These springs were longer than the original ones. I had to raise my Z height limit switch so the nozzle wouldn’t drive down into the bed. ( couldn’t drop the bed down enough ) seems to hold better although I did also install level knob locks at the same time.

Jay L.

Seems like a waste of money.... Until your actually get them. Offers much more pressure on the bed which in turn holds the level a lot longer then the original springs. I would highly recommend these

Vladimir I.

Great product. Must have for any ender

Nicholas V.

This should be your first purchase for an ender 3.

Stephen C.

Huge difference from the stock and these ones. More precise and less aggravation with the adjustment of the printer bed. Very happy with the product.

jean d.

good

Tristan D.

Great upgrade !

Konrad B.

First and most recommended upgrade! No more bed adjustments! Love it

Dylan K.

Since putting these springs on, I haven't had to level the bed again. You will need to adjust the z-stop switch up a bit do the head stops at a higher height.

Michel M.

Remplacement des pièces original plus solide.

Brad W.

These springs were shipped, and arrived at my house very quickly. Much better than the stock springs on the Ender 3 and have solved quiet a few problems.

Mathieu G.

Very strong springs.

Official Creality Pressure Heatbed Spring (Qty 4)

Name: Official Creality Pressure Heatbed Spring (Qty 4)
Brand: Creality
SKU: 4004010196
Price: 7.95 CAD
Availability: OutOfStock

Brand: Creality / 21 Reviews /

CAD

All orders ship from Canada. Duties and taxes may apply.

Current Inventory:

Quantity:

Something went wrong!
Please refresh the page and try again.