High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 300°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C), then you will need to use a plated copper heater block along with a PT100 or PT1000. Print standard materials such as PLA, PETG and ABS and high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.

Precise

Our all-metal HeatBreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal HeatBreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.


Key features:

- All metal heatbreak
- Maximum temperature: 285ºC
- Cartridge style heater block
- Groove mount

Default Kit includes:

- 1 x V6 heatsink 1.75mm
- 1 x V6 heatbreak 1.75mm
- 1 x V6 brass 0.4mm nozzle 1.75mm 
- 1 x V6 duct
- 1 x V6 aluminium heater block
- 1 x Heater cartridge 12V or 24V
- 1 x Thermistor cartridge
- 1 x Thermistor extension cable
- 1 x 30 x 30 x 10 fan 12V or 24V
- 1 x Thermal compound
- 1 x V6 fixings kit
- 1 x V6 silicone sock
- 1 x PTFE tubing 100mm