What the Bambu Lab P2S Combo is built to do

The Bambu Lab P2S Combo is an enclosed 3D printer package with the AMS 2 Pro, designed to deliver multi-colour printing, active filament drying, reliable extrusion, and easier day-to-day operation. It combines automated calibration, AI-based failure detection, adaptive cooling and chamber control, and hardened components for demanding materials.

Main features of the Bambu Lab P2S Combo

• 5-inch touch screen
• AI failure detection
• Auto flow dynamics calibration
• Multi-colour printing
• Cold-air cooling
• Active venting filament drying
• 256 × 256 × 256 mm³ print volume

Product highlights

Easier printer control with a 5-inch touch screen and second-generation UI

The P2S is designed to feel more like using a modern smart device. A fully upgraded touchscreen, a more powerful processor, and the second-generation user interface provide smoother interactions, richer graphics, and clearer step-by-step guidance during setup and printing.

5-inch Touch Screen | 2nd-Gen UI

Higher extrusion force with real-time clog and grinding detection

The PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force, giving 70% more force than its predecessor. That added force improves high-flowrate extrusion stability, while the proprietary servo architecture samples resistance and position at 20 kHz to detect filament grinding and clogs in real time.

PMSM Servo Architecture | DynaSense Extruder

More consistent corners and layers with active flow compensation

The Bambu Lab P2S uses a high-resolution, high-frequency eddy current sensor to calibrate flow dynamics. Intelligent algorithms then adjust flow rate based on the sensor readings to maintain more precise and consistent extrusion across layers, edges, and corners.

Active Flowrate Compensation | Eddy Current Pressure Sensor

Adaptive cooling for stronger overhangs with low-temperature filaments

The Adaptive Airflow System improves cooling by drawing cool air directly from outside the chamber instead of recirculating hot internal air. That approach helps maintain overhang quality and reduce nozzle clog concerns when printing low-temperature filaments with the door closed.

Cold-Air Intake | Cooling Mode

50°C chamber support for engineering-grade filament printing

The same Adaptive Airflow System also uses flap-controlled airflow management to seal heat inside the chamber when needed. This supports a 50°C chamber environment for materials that are prone to warping, while a high-performance carbon filter continuously filters internal air to help maintain cleaner and safer workspace air quality.

Heat Preservation | Carbon Filter

AI print monitoring for safer and more accurate starts

The P2S adds AI computer vision to detect common print problems during operation. The system checks print-start conditions and actively monitors for spaghetti failures, nozzle blobbing, and other print errors so issues can be identified earlier.

AI Error Detection | 2 TOPS NPU

Start Check
Spaghetti
Nozzle Clumping
Purge Chute Jam

Faster maintenance with a 30-second nozzle swap

The quick-swap hotend uses a one-clip design that releases the full nozzle and heatsink assembly without disconnecting wiring. This reduces nozzle change time and lowers the risk of wiring mistakes during maintenance.

Quick Swap Hotend | 1-Clip Design

Remote monitoring and timelapse capture with better image quality

Enhanced LED lighting improves the clarity of liveview video and timelapses. Combined with a high-frame-rate 1080P camera and dual-band Wi‑Fi, the printer supports more comfortable remote monitoring and better-lit timelapse footage.

"Stage" Lighting | 1080P High-Rate Camera

Built for fibre-reinforced materials

The P2S extrusion system is equipped with a hardened steel nozzle and hardened steel extruder gear. These wear-resistant components are intended for stable, long-term printing with high-performance fibre-reinforced materials.

Hardened Steel Nozzle | Hardened Steel Extruder Gear

AMS 2 Pro adds multi-colour printing and active filament drying

The AMS 2 Pro is the material system included in the Combo package. It is designed to improve multi-colour printing reliability and adds filament drying with an active venting system that dries filament 30% faster than sealed heating while maintaining low humidity for storage and print quality.

Auto Venting Filament Drying | Multi-Color Printing

Automated venting for drying and sealed storage

The AMS 2 Pro uses an electromagnetic air vent that automatically manages venting during drying and then seals the system airtight for extended storage. This supports dehumidification during the drying cycle and helps preserve filament condition for weeks of printing.

Faster multi-colour filament changes

The PMSM feeding motor in the AMS 2 Pro increases filament feeding speed by 60%. Bambu Lab states this saves an average of 10 minutes for every 100 filament changes.

Integrated access to print-ready models and guided project tools

The broader Bambu ecosystem supports the P2S with ready-to-use models, guided print profiles, and project hardware sourcing. For users who want a more streamlined workflow, these tools reduce the time spent on slicing setup, sourcing parts, and basic design tasks.

MakerWorld | Over a Million Models at Your Fingertips

MakerWorld provides a large catalogue of models prepared for the P2S, with integrated print profiles matched to the printer and supported filaments. That reduces manual setup and makes it easier to start printing models without tuning settings from scratch.

MakerLab | AI Assisted 3D Modeling Tools

MakerLab includes AI-assisted tools for creating personalised projects without requiring traditional 3D modelling experience. Examples listed for the platform include lightboxes, relief sculptures, PrintMon figurines, bookmarks, and custom organisers.

Maker's Supply | Parts for Functional Print Projects

Maker's Supply provides non-printed hardware such as motors, LEDs, bolts, and magnets to match compatible MakerWorld projects. Each pre-tested kit is intended to align with the Bill of Materials for the selected design.

Refinements that improve daily use

The P2S includes smaller design changes that focus on routine handling, cleanliness, flexibility, and safety. These refinements may be less visible than the printer’s headline features, but they affect how practical the machine is to use over time.

Built-in 2-in-1 Buffer (equipped with AMS combo)
The built-in 2-in-1 buffer makes it easier to switch between the AMS and external filament spools, giving more flexibility in material handling.

Flat Base Plate
The flat base plate provides a smooth surface that is easier to wipe clean, helping remove residue and keep the printer interior tidier.

Integrated Lift Handles
Integrated lift handles are designed to make transport safer and easier by improving grip and helping protect your hands while moving the printer.

Shatter-Safe Front Glass
The front glass uses a protective film designed to resist shattering, adding a safety-focused detail for the user and surrounding workspace.

Use cases for the Bambu Lab P2S Combo

• Multi-colour models and display prints: The AMS 2 Pro supports multi-colour workflows while reducing handling and drying-related interruptions.
• Engineering and functional parts: The enclosed chamber, heat preservation, and carbon-filtered airflow support materials that need a warmer and more controlled environment.
• Fibre-reinforced material printing: Hardened steel extrusion components are suited to wear-prone composite filaments used for stronger end-use parts.
• Remote monitoring and content creation: The integrated camera, improved lighting, and dual-band Wi‑Fi support live monitoring and timelapse recording.
• Frequent nozzle changes and material switching: The one-clip hotend and built-in 2-in-1 buffer simplify maintenance and spool management.
• Beginners who want a guided workflow: The second-generation UI, AI print checks, and MakerWorld integration reduce setup friction and make operation more approachable.

Important notes

Big thanks to everyone who created these amazing projects: 911 Turbo by @Mr.Rod; SVF1 by @Ouky1991; Another Lamp by @lautaro.id; 3D printed slides by @CloudBerry; Pietone 3D Printing Keyboard by @Makesenstudio; Thirst Zapper water shooter by @Neebick; Machinist Infinity Cube by @Franken 3D; Minecraft TNT by 星云丿长歌; Formula race car by @SAMPAN棱界复刻; Steering Wheel by @Marconooren; P51 Mustang by @Planes01; House scene by @BambuLab; AM Vantage by @Cormango; A1 Robot by @洞洞脑子研造社; Plant Pot Stratum by @Hplnvent.

All product data for the P2S is based on Bambu Lab’s internal testing. Actual results may vary due to individual product differences, user habits, and environmental conditions. Please refer to actual usage for reference.

Creator projects are provided for illustrative purposes only. Bambu Lab does not endorse, and disclaims any representations or warranties regarding creator projects, including, without limitation, the safety, marketability, or usability of any 3D printed works based on such projects.

Filament grinding detection on the DynaSense Extruder may vary depending on filament type.

Push notifications require use of Bambu Handy and cloud connectivity.

The claimed performance of P2S is based on testing results under the recommended operation environment on the spec sheet.

Technical specifications

Frequently asked

What printers are saying