i would like to know what is the best slicer for this machine to use
Second one I have bought. Saw the price drop had to grab it. love it . Easy to install. if you know anything about installing a hotend, then this easy. Will prob get another one for the other machine.
Made my life so much easier. Put one in you printer or have the shop do it. Causes sanity and smiles.
Great hot end upgrade. I actually prefer this one over the V6. I installed it to the Direct extruder upgrade kit and re-used the heater cartridge and thermistor, so no need to change out the firmware. Likewise, I made a video showing the process on my main YouTube channel and will be doing a final review of all the mods in a future video. Just look up "Yarkspiri direct extruder upgrade" if you're interested in seeing that.
You people suck and your service is terrible. You invite me to visit your forums for help,I invite you to kiss my ass!
3D Printing Canada is going to be my new supplier for all my personal printing needs. Amazon may be faster, but for what I've ordered in the past, 3DP has been cheaper, and you're not funding billionaire space as they're probably still printing their rocket ;-) .
Good product use it on all my ender 3 max and 2 ender 3 never clog again
Print like a charm!!!! I love it! Perfect fit!!!!
Je l’adore un vrai charme! Prochaine upgrade sur ma v2 j’hésite encore entre direct drive ou pas!
Easy install, minor adjustments on retraction and good to go for 275C without issues
Works great on my ender 3v2 for long prints with hoter filament like PETG and ABS
Bought a Micro Swiss hot end because of multiple clogs with the oem and a knock off hot end, so far I have ran 5 prints for over 100 hrs and no clogs!!
Great price, works as advertised, and since I upgraded to micro swiss I've been printing PETG comfortably without worrying about clogs
Nozzle wouldn't seat properly and it leaked plastic all over my first few prints. Took it all apart, cleaned everything. Reseated the nozzle using a blowtorch, so stopped leaking. Now have yet to get through a print without it jamming up. Have tried every setting possible and nothing works. Going back to original that came with my Ender 5.
Great upgrade to my Ender 3 Pro. This modification now safely allows me to print PETG parts for my Radio Control Warships. Lots of files backed up, now ready to print!
You can't go wrong if you're using one of the supported printers. They're durable, easy to find nozzles for. At least for the CR-10S, you don't need to print any adaptions for it. It's okay, treat yourself!
Must have upgrade for your Creality printer!!
This combined with a good PTFE tube opens up many more possibilities with regards to filament types and temperatures.
Easy installation, requires a bit of tweaking so watch some of the videos. Also don't forget to print your BLTouch bracket BEFORE you take your old hot end apart! LOL
Wow... I'm not sure where to begin. This upgrade made so many improvements. It clogs less, the detail is more refined, and it's all metal. Such a nice difference. This is in my opinion a MUST buy upgrade for your Creality Ender 5 series of 3D printers.
Good quality hot end. Using it on and Ender 5 and it's been printing flawlessly. Just tweak down the retractions and all should be fine. Using with PETG.
Can't go wrong buying Micro Swiss. If you have an ender 3 and want to go direct drive. Concider buying the kit that includes this hot end to save. The Micro Swiss nozzles are very nice as well. If you have only used cheap brass nozzles give them a try. You will not regret it or go back to the brass.
Followed the simple to follow instructions, this was my very first print attempt to check retraction. And so far no jams, no issues. Looking good!
fits the ender 5 pro nicely
I am a novice at 3D printing. I bought this to help me stop having nozzle jam ups. It has been a great reduction in this area, but I personally still need some self taught training here. I really believe that this product is great with keeping the heat away from an expansion point and possible jam ups with better design and function. I recommend this upgrade.
Big improvement in temp consistency and ease if use from the stock hotend. Definitely recommend for heavy users!
Install was a direct swap on the Ender 3. I've had it printing PETG for the last 24 hours on several smaller prints and it's been flawless.
Really like this... I now feel safer printing with PETG at temperature close to 250C.
More reliable than the stock hot end of my ender 3.
Simple install however required a print of fan duct to raise inline with nozzle on v2 cr10s pro
Very well built. Easy to install, and prints perfectly.
Quality is great
Love the design
Great for high heat projects
Feels more light than anticipated, but it is still a very well made hot end, highly professional. Easy installation, but don't forget to auto-tune your PID after.
Easy to install by using their video instructions. Made a huge difference in my prints.
Works like a charm!
very nice hot end, iam new to 3d printing and wanted a drop in hot end, no flashing of the board, just drop in and start printing, and its not a knock off,