eSUN PLA+ Filament – 1.75mm, 1kg Spool
eSUN PLA+ is an easy-to-print PLA-based 3D printing filament formulated for greater toughness and impact resistance than standard PLA. It combines the familiar printability of PLA with improved durability, making it a versatile choice for functional parts, prototypes, models, cosplay, fixtures and everyday 3D printing.
This 1.75mm PLA+ filament is supplied on a 1kg spool and is available in a wide range of colours. The [Colour] variant provides a consistent, opaque finish suitable for both functional prints and visual models.
Why Choose eSUN PLA+?
- Greater toughness than standard PLA for parts that need improved durability
- Easy to print on most 1.75mm FDM/FFF 3D printers
- Low shrinkage helps reduce warping during printing
- Consistent extrusion for reliable, repeatable prints
- High-speed capable when printed with suitable equipment and tuned settings
- Wide colour selection for prototypes, models and finished parts
- 1kg spool provides a practical quantity for general-purpose 3D printing
Recommended Applications
eSUN PLA+ is a versatile material for general-purpose FDM/FFF 3D printing. It is well suited to:
- Functional prototypes
- Engineering and design prototypes
- Cosplay and props
- Models and display pieces
- Household parts and organizers
- Fixtures, brackets and mounts
- Educational projects
- General-purpose 3D printing
Printing Recommendations
For typical printing, eSUN recommends an extrusion temperature of 210–230°C and a heated bed temperature of 45–60°C. Actual settings should be adjusted for your printer, nozzle, layer height, print speed and cooling.
eSUN also lists PLA+ as suitable for high-speed printing at speeds below 300mm/s when used with an appropriate high-speed printer and properly tuned settings.
Compatible 3D Printers
eSUN PLA+ is compatible with most FDM/FFF 3D printers designed for standard 1.75mm PLA filament. It can also be used with many modern high-speed 3D printers when appropriate PLA+ settings are applied.
Always follow the filament manufacturer's recommended temperature range and your printer manufacturer's material requirements.
Storage and Drying
PLA+ can absorb moisture from the surrounding environment, which may affect print quality. Store unused filament sealed in a dry environment and dry the filament before printing if it has absorbed moisture.
When drying is required, eSUN recommends 50°C for 8–12 hours.
Available Colours
eSUN PLA+ is available in a broad range of colours, including Black, White, Cold White, Bone White, Grey, Yellow, Fire Engine Red, Blue, Red, Orange, Brown, Silver, Purple, Olive Green, Pine Green, Pink, Light Blue, Peak Green, Beige, Dark Blue, Gold, Light Brown and Green.
Looking for another colour? Browse the full eSUN PLA+ filament collection to see available colours and formats.
Technical specifications
| Specification | Details |
|---|---|
| Material | PLA+ |
| Filament Diameter | 1.75mm |
| Diameter Tolerance | ±0.05mm |
| Net Filament Weight | 1kg |
| Spool Type | Spool |
| Colour | [Colour] |
| Extrusion Temperature | 210–230°C |
| Heated Bed Temperature | 45–60°C |
| Recommended Print Speed | Up to 300mm/s* |
| Density | 1.24 g/cm³ |
| Melt Flow Index | 3.7 g/10 min at 190°C / 2.16kg |
| Heat Deflection Temperature | 53.78°C |
*High-speed printing capability depends on printer, hotend, nozzle, cooling, layer height and other print settings.
Will it work with my printer?
Frequently asked
What printers are saying
Green - eSun PLA+ Filament - 1.75mm, 1kg
All orders are shipped from Canada. Duties, taxes, and tariffs may apply.
Mix & Match from the Bulk Filament page to Save More!