/
Key Features
Magigoo Pro Flex (50ml) – Adhesion for flexible filaments
Magigoo Pro Flex is designed for flexible materials—especially thermoplastic elastomer copolymers (TPE/TPC)—where adhesion and clean removal can be tricky. It provides a strong base during printing while helping make removals manageable (often with water-assisted release).
Key benefits
- Purpose‑built for flexible plastics, especially TPE/TPC type filaments.
- Strong adhesion platform during printing while supporting easier removal.
- Designed to be used like other Magigoo pen adhesives with thin, even coats.
How to use
- Apply on a clean build surface (ideally on a cool bed).
- Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
- Spread an even, thin coat over the active print area—make sure no spots are missed.
- Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.
Print tips
- Follow your filament maker’s bed/nozzle temperatures; raising first-layer temps by ~5–10°C can aid adhesion.
- Some prints benefit from a 10–20mm brim for best first-layer security.
- For stubborn flexible prints, water around the part can help release.
Cleanup
Use water and a cloth. For flexible materials, water can also assist with part release.
Safety & handling
- Apply on a cool bed and avoid applying when the bed is already hot.
- Do not squeeze aggressively—flow is controlled by the applicator valve.
What’s included
- 1 × Magigoo Pro Flex pen bottle
Specifications
Specs
- Net volume: 50ml