Free Whitepaper: Download our Free Whitepaper: The Comprehensive Guide to Comparing 3D Filament
Red - 1.75mm TPU Filament - 1 kg
Approximately:
In stock
Click here to read our Price Match Policy.Thermoplastic polyurethane (TPU) is a high strength flexible filament. TPU is essentially polyurethane and belongs to the TPE class of thermoplastics (similar to the stuff NinjaFlex is made out of). TPU is an elastic, very flexible and soft material that is almost odourless. It is similar to rubber.
| Product Description | |||
|---|---|---|---|
|
Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties, outstanding wear resistance, good tensile strength, good damping and resilience performance and superior low temperature flexibility. Typical applications Sport-shoe soles and accessories, Skiboot shells, technical mouldings, e.g. seals, castor tyres, tubing. |
|||
| General | |||
| Material Status | Commercial: Active | ||
| Literature1 | Processing - Elastollan (English) Technical Datasheet (English) |
||
| Availability | Europe | ||
| Features | Good Wear Resistance | Low Temperature Flexibility | Resilient |
| Uses | Footwear Seals |
Sporting Goods Tubing |
|
| Processing Method | Blow Molding | Extrusion | Injection Molding |
| Physical | Nominal Value Unit | Test Method | |
| Density | 1.21 g/cm³ | ISO 1183/A | |
| Mechanical | Nominal Value Unit | Test Method | |
| Abrasion Loss | 30.0 mm³ | ISO 4649-A | |
| Elastomers | Nominal Value Unit | Test Method | |
| Tensile Stress 20% Strain 100% Strain 300% Strain |
4.00 MPa 7.00 MPa 20.0 MPa |
DIN 53504 | |
| Tensile Stress Yield 3 Yield |
40.0 MPa 55.0 MPa |
DIN 53504 | |
| Tensile Elongation 3 (Break) | 550 % | DIN 53504 | |
| Tear Strength 4 | 90 kN/m | ISO 34-1 | |
| Compression Set 23°C, 72 hr 70°C, 24 hr |
25 % 40 % |
ISO 815 | |
| Impact | Nominal Value Unit | Test Method | |
| Charpy Notched Impact Strength -30°C 23°C |
No Break No Break |
ISO 179 | |
| Hardness | Nominal Value Unit | Test Method | |
| Shore Hardness Shore A, 3 sec Shore D, 3 sec |
91 42 |
ISO 7619 | |
| Injection | Nominal Value Unit | ||
| Processing (Melt) Temp | 190 to 220 °C | ||
| Mold Temperature | 20.0 to 50.0 °C | ||
| Extrusion | Nominal Value Unit | ||
| Melt Temperature | 180 to 230 °C | ||
