Prints better than my ender 5 BUT I have yet to achieve 250mm/s as advertised. Still though, prints better and more solid frame. Would recommend for sure.

That was my first purchase and that will not being my last, for sure. Everything was perfect !!

Had a problem and contacted them. They were very helpful and offered solutions that were exactly what I needed. The help was very appreciated.

Very good quality of filament....good flexibility and roughness.

Great dryer The bright colors of the tpu, easy great prints.

I am very disappointed with Creality Ender 3 V2 printer. The V4.3.1 board has been a real pain with little support, cable for the heated bed is too short, Printer is noisy, The Y stepper motor, The Power cables on the V4.3.1 board were so loose that it pulled out with no friction . Power supply was over heating due to poor ventilation ( Poor Design ). I am very happy with my 3 year old Ender 3 Pro and impressed with Jason and 3D Printing with the help that he provided but not with my Ender 3 V2. Thank You

Excellent printer, assembly took less than 30 minutes. I still need to do some fine tuning, but out of the box the print quality was good.

This is my first experience with resin printing. I purchased this wash and cure station to compliment my resin printer. No complaints with this unit. It is quite easy to operate and very versatile. To wash the print you have the options to use the included basket or to transfer the printer's plate directly to the wash station. You can specify the length of the cycle and the fan at the bottom of the wash station spins both clockwise and counter clockwise to agitate the cleaning solution thusly doing a thorough job of cleaning the print.After letting the print dry you can place it on the turntable plate and initiate the cleaning cycle and voila you have a cured print with no mess or fuss.Overall quite an impressive unit.

Fast and furiously clean

the machine arrived incorrectly assembled, after a week the heating block unscrews and doesn’t want to hold. the objects are stuck on the bed. parts are difficult to find.

Dumb

It's a great printer only a 4 star cuz one of the fans makes Soo much noise when its starting up like it's rubbing something took it apart and couldn't find anything in the way. Other than that it's an awesome printer

Purchased the Ender 6 Core XY. My first 3D printer. Assemble wasn't difficult. Leveling the bed took a while to figure out. Works great, I love it. Been using it for at least 4 months.

great stuff

I am happy with the help i got from 3d Printing Canada; the screen on my new Ender 6 was broken and they helped me to get the problem solved. Its my first 3d printer and I am impressed by its capabilities but the instructions and documentation from the manufacturing company could benefit from a few updates to make i easier for newbies who don't read mandarin; perhaps more information to setup the Ender 6 in the new Cura Slicer. A flat glass for the printing surface would have been nice too but mine was high in the middle and had to use it upside down with some glue stick.

The team at 3d print Canada is amazingly helpful. It was refreshing. My 3d printer works great too.

Arrived safe and secure

Amazing service. Quick shipping. Product works perfectly.

Good

Worked right out of the gate only had to level the bed right and it got to work. The pla it came with was pretty cheap and it jammed the printer a few times so I switched to pla+ and it hardly ever jams. Best purchase this year.

The printer was a snap to put together had it done in less then an hour. Its very Quiet and seems very reliable. I am having a lot of successful prints and they look good. The Printer looks Great in my office much more professional with the enclosure. A great experience in 3d Printing ... Now what to make next hmmm..

I find it kinda funny I can write a review of shipping insurance. What can I say all my orders arrived in one piece. but hey if you think that's what kept my order from being lost I have a rock that keeps away tigers you may be interested in.

I am new to 3d printing and I could not be happier with my new ender 3 v2 printer. Its very well made and i am having so much fun printing parts which i have downloaded I am also learning 3d modelling and printing my own designs. Its an excellent hobby for an individual or a small group.

Good stuff. Haven't uses the PLA max before but it is a lot stronger and good for utility purposes.

The silent board and BL Touch are working perfectly despite the terrible included instructions. A lot of Googling was needed to get the hardware set up properly. Pay attention to version numbers. It matters! Also, familiarity with electronics and programming firmware is required. Losing 1 star for lousy set up instructions. Shipping took a week.

Works great right out of box. Very little needed to be adjusted for excellent prints.

Having a issue. I printed the dog. went well. Printed half the cat then it stopped,started to get really thin strands of plastic from the extruder and now, none at all. Have been trying to trouble shoot. The fan also started making a really loud squealing sound, so I haven't been using it. I need a new fan'

Perfect stuff

Wat

Seriously? It is shipping insurance! I didn't need it but I assume it works and has a warranty :)

The printer is constructed very well, easy assembly, poor instructions better ones on YouTube, no cad program so for first timers it was difficult to find and learn one that worked well I now am using freecad but with difficulty

Everything from ordering, payment, shipping and receiving of my cr-10 v3 was easy and well communicated and it’s performance has exceeded my expectations.

Very happy with purchase of Ender 5 Pro, great machine, easy set up, and very nice prints. Was very happy with “3D Printing Canada, good prices and fast shipping. Highly recommend.

Excellent service, Very Fast Shipping, Excellent Product, purchased filament worked flawlessly. Highly Recommend

with the covid related shipping/delivery issues, I wanted some insurance just in case. Order arrived very fast however so no complaints

Very nice product Sakata is the best filament

Keep print objects securely during printing, and easily pop out once the build plate cool down. Very convenience and safe comparing to stock textured buildtak/glass surface. Fully recommended!

These carbot lings printed out in only about an hour, super fast, super perfect, monocure flex100 flows like hot water, very little viscosity, perfect for prints! 60s initial layer 3 initial layers 10s layer time 10s light off time Don't lift faster than 120 on first layers to avoid splash PROFIT!