Free Whitepaper: The Comprehensive Guide to Comparing 3D Filament

download Now
Transparent Sea Green (Atrovirens) - 1.75mm PETG Filament - 1 kg

Transparent Sea Green (Atrovirens) - 1.75mm PETG Filament - 1 kg

$33.95 CAD was

It is the latest all-rounder co-polyester 3D filament which is made from a mixture of Glycerol and PET. All other 3D filaments were not specifically designed for printing objects in 3D; they were repurposed for 3D printing.

Their original purpose was something entirely different whereas PETG is that category of thermoplastics which is specially developed for 3D printing.

Its key features have subtle differences as compared to its counterparts, but they make all the difference. It produces little to no odor during printing and has real strength combined with enhanced flexibility and durability.

It has better layer adhesion for improved surface finish and has a higher melting point than PLA. Another advantage is that is comes approved by the FDA for food contact.

It is ideal for building mechanical parts and has more flexibility than ABS, PLA and even PET. The general temperature range for this thermoplastic is 220-235C. It does not require a heating bed, and there is minor shrinkage after cooling. It is eco-safe and can be properly recycled. It rarely warps and is known for its clarity and bridging properties.

Technical Data

Physical Nominal Value Unit Test Method
Specific Gravity 1.27 g/cm³ ASTM D792
Water Absorption (24 hr) 0.20 % ASTM D570
Color b - Hunter4 < 1.00 ASTM E308
Mechanical Nominal Value Unit Test Method
Tensile Strength
Yield
Break

53.0 MPa
26.0 MPa
ASTM D638
Tensile Elongation5
Yield
Break

5.0 %
70 %
ASTM D638
Flexural Modulus 2150 MPa ASTM D790
Flexural Strength 6 80.0 MPa ASTM D790
Impact Nominal Value Unit Test Method
Notched Izod Impact (23°C) 90 J/m ASTM D256
Hardness Nominal Value Unit Test Method
Rockwell Hardness (R-Scale) 116 ASTM D785
Thermal Nominal Value Unit Test Method
Deflection Temperature Under Load
0.45 MPa, Unannealed
1.8 MPa, Unannealed

74.0 °C
70.0 °C
ASTM D648
Vicat Softening Temperature 83.0 °C ASTM D15257
Electrical Nominal Value Unit Test Method
Surface Resistivity 1.0E+16 ohm ASTM D257
Volume Resistivity 1.0E+15 ohm·cm ASTM D257
Dielectric Strength8 16 kV/mm ASTM D149
Dielectric Constant
1 kHz
1 MHz

2.60
2.40
ASTM D150
Dissipation Factor
1 kHz
1 MHz

5.0E-3
0.023
ASTM D150
Flammability Nominal Value Unit Test Method
Flame Rating
1.00 mm
1.50 mm
3.00 mm

HB
HB
V-2
UL 94
Optical Nominal Value Unit Test Method
Gloss (60°) 159 ASTM E308
Refractive Index 1.570 ASTM D542
Transmittance 89.0 % ASTM D1003
Haze < 1.0 % ASTM D1003
In stock

Transparent Sea Green (Atrovirens) - 1.75mm PETG Filament - 1 kg is currently unavailable and will be restocked soon!

Leave your email address if you would like to be notified when it becomes available.


Free Canada-wide Shipping On Orders Over $120!
$10 Flat-rate Canada-wide Shipping On Orders >$20