What Is The VentoBox for Bambu Lab P2S?
The VentoBox is an advanced all-in-one HEPA 13 and activated carbon filter designed for the Bambu Lab P2S. It seamlessly slots into the left side of the printer, offering superior filtration by removing 99.95% of nanoplastics, harmful VOCs, and odors for a cleaner and safer 3D printing experience.
Single Pass Mode
Single Pass Mode allows VentoBox to operate as an exhaust filter. Air is drawn from the printer chamber, passed through the 2-stage HEPA 13 and activated carbon filter, and exhausted out of the printer. Designed for PLA and PETG.
Multi-Pass Mode
Multi-Pass Mode allows the VentoBox to operate as a closed-loop filter, keeping warm air inside the chamber while continuously filtering the air within the printer. It is designed for higher-temperature filaments such as ABS, ASA, and nylon.
HEPA 13 & Activated Carbon
The VentoBox is a two-stage filtration system with a HEPA 13 layer and an activated carbon layer that effectively removes 99.95% of toxic nanoplastics (PM2.5), ultrafine particles (UFPs), harmful fumes (VOCs), and odors generated during 3D printing.
Seamless Upgrade
The VentoBox is a true plug-and-play upgrade that installs seamlessly into the left side of the Bambu Lab P2S. Its fans connect directly to the printer, enabling full fan speed control through the printer’s touchscreen, firmware, and slicer. Installation takes only 5 minutes.
Native Integration with Bambu Lab
VentoBox is now natively integrated into the Bambu Lab P2S firmware. The filter can be controlled directly from the printer itself and through the Bambu Handy app. This integration was made possible through a collaboration between thrutheframe and Bambu Lab.
HEPA 13 Removes 99.95% of Ultrafine Particles (UFPs)
| Filter Type | All-In-One HEPA 13 and Activated Carbon Filter for Bambu Lab P2S |
| Fan | High-Flow 7530 Dual Ball Bearing 4-Pin Fan - Plug in directly to the printer |
| HEPA Rating | HEPA 13 Layer Eliminates Toxic Nano-Plastics (PM2.5 and UFPs) |
| Activated Carbon | Activated Carbon Layer Reduces Odors and Harmful Fumes (VOCs) |
| Filter Replacement | Replace the Filter Every 250 Print Hours or 2 Months |
| Installation | Installs seamlessly into the left side of the Bambu Lab P2S; Installation takes only 5 minutes. |
| Integration | Fans connect directly to the printer; full fan speed control through the printer’s touchscreen, firmware, and slicer. |
| What's Included | VentoBox Filter; M3X8MM |
| Manufactured | Developed in collaboration with Thurtheframe for the US market, the VentoBox is proudly manufactured in the USA using VOXELPETG+ HS. |
Voxel Bambu Lab P2S Vento Box 2-Stage Filter
All orders are shipped from Canada. Duties, taxes, and tariffs may apply.