Bambu PLA Aero
Bambu PLA Aero achieves low density and light weight by foaming at high temperatures during printing and creating small holes inside the prints. It's the perfect choice for light-weight and energy-saving prints, including unmanned aerial vehicles (UAVs), aerodynamic models, and gliders.
Foaming PLA materials (PLA Aero) have high requirements for material drying and parameter settings. Please carefully read Instructions for printing aircraft model with foaming PLA (PLA Aero) before starting the printing process.
Low Density and Light Weight
Bambu PLA Aero as almost the same filament density as regular PLA, while the prints density is only 50% to 80%.
* When printing models of the same volume, PLA Aero is about half the weight of PLA Basic.
Controllable Model Density
Achieve lower density of the prints by increasing printing temperature and lowering flow rate.
* The average density of prints will vary with changes in parameters such as actual printing temperature, flow rate ratio, printing speed, model size, wall thickness and infill density.
Tough with Good Impact Resistance
Compared to pre-foaming Wood PLA, Bambu PLA Aero and its prints are tougher and more resistant to impact, collision, and falling.
Matte Finish For Easy Coloring
Bambu PLA Aero provides an easy-to-color matte surface texture with better dyeing results as compared to PLA Basic.
Technical specifications
| Application | 3D RC Planes Printing |
| Feature | Low Density and Light Weight |
| Impact Resistance | Tough with Good Impact Resistance |
| Finish | Matte Finish For Easy Coloring |
| Diameter | 1.75mm +/- 0.03mm |
| Available Colors | White (14102), Black (14103), Gray (14104) |
| Type | Filament with spool |
| Size | 1kg |
| Printing Temperature | 220 - 260 ℃ |
| Printing Speed | < 180 mm/s |
| Flow Rate Ratio | 0.5 - 0.8 |
| Filament Density | 1.21 g/cm³ |
| Foaming Rate | 0 - 120% |
| Prints Density | 0.55 - 1.05 g/cm³ |
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 220 - 260 °C |
| Bed Temperature (with Glue) | 35 - 45 °C |
| Recommended Printing Speed | < 180 mm/s |
| Density | 1.21 g/cm³ |
| Vicat Softening Temperature | 54 °C |
| Heat Deflection Temperature | 53 °C |
| Melting Temperature | 153 °C |
| Melt Index | 7.7 ± 0.6 g/10 min |
| Tensile Strength | 24 ± 2 MPa |
| Breaking Elongation Rate | 2.6 ± 0.7 % |
| Bending Modulus | 1690 ± 120 MPa |
| Bending Strength | 45 ± 4 MPa |
| Impact Strength | 28.8 ± 1.3 kJ/m² |
Will it work with my printer?
What printers are saying
White - Bambu Lab PLA Aero - 1.75mm, 1kg
All orders are shipped from Canada. Duties, taxes, and tariffs may apply.